Let me drop a dime to HKS and get some specifics. Once I find out what their kit looks like I should be able to give you the right info.

Option 2 is email me a pix of the HKS BOV mounted. To Sales@MaxumTechnologies.com and that will probably be better. What it's going to come down to is whether I get Mike @ HKS on the phone.

I'll pm or post in a bit. Thanks and GOOD QUESTION!

 

Well technically were representing Nisei and Kevin is not back, BUT he's made it very clear to us that we've got some big shoes to fill. So, myself, Danny, & D are going to do our best to make sure you good people are taken care of!

 

Joey,

I'm going to take a stab at it and assume you have the Nisei LIP??

If you do that would explain it. The intake hard pipe kits we've got are for the OEM LIP. The mounting is a little different.

If you don't have the Nisei LIP let me know and I'll jump on the hotline to Nisei and get some answers for you.

Jed

 

any parts for the ix?

 

I/C piping looks great. I like that you do it in anodized black instead of overly played out polished aluminum/

Props and welcome back!

 

Props to Nisei. Installed both the UICP and LICP with my AEM intake.. good stuff

 

What do you mean Kevin isn't back?

Doesn't he own Nisei?

 

Romeo,

Ok, didn't get a hold of Mike at HKS so, I'll keep trying. This is the only thing I was able to find:http://smg.photobucket.com/albums/v2...t=MVI_0345.flv

If this is the kit you have then the Intake only pipe will work (with stock LIP) but, you will have to:

(1) Plug the BOV return on the intake pipe itself.
(2) Place an order for a Intake hard pipe without the return fitting. It can be done Nisei has expressed they would take care of it but, you might have to wait for the color process. Might take up to 2 weeks. If you want to find a plug/cap then it can be shipped same day as order.

Outside of that if you already have a AEM intake kit then you will have to change:
(1) Back to your stock MAF housing.
(2) Trim the AEM housing pipe. Here is a link: http://www.nisei-evo.com/forum/viewtopic.php?t=632

Some pix for you:

 

[QUOTE=h22gordo;6294011]What do you mean Kevin isn't back?

Doesn't he own Nisei?[/QUOTE

We are just Nisei Engineerings Master Distributor, we are separate from Nisei Engineering themselves.

Jed,

 

I think we were saying it's nice to see Kevin's products back, not that you were actually Kevin

 

There are several ways we can put a Matte Black kit together for you. Example:

(1) 1018 Steel LIP / 6061 AL Intake hardpipe / 6061 AL UIP - Out of stock, if we get lucky we might get some tomorrow!
(2) All 6061 AL kit with 1 pc UIP = same as above.
(3) All 6061 AL kit with 2 pc UIP Type A
(4) All 6061 AL kit with 2 pc UIP Type B
(5) 1018 Steel LIP / 6061 AL Intake hard pipe / 6061 UIP 2 pc Type A.
(6) 1018 Steel LIP / 6061 AL Intake hard pipe / 6061 UIP 2 pc Type B.

As for the pipes they will basically look like this:

2 pc Type A


2 pc Type B


1pc - Back Order - If we get lucky tomorrow, cross your fingers!


LIP & Intake hardpipe:


Difference would be the way you combo it up. Steel/Aluminum or straight Aluminum.

PM me for prcing on the kits you might be interested in!

Jed,

 

Plenty of stuff for the 8/9! Here is the thread you want!

https://www.evolutionm.net/forums/sh...ighlight=nisei

Let me know if you need any pricing info!

Jed,

 

Just to the evening crowd know Nisei is BACK! In case you missed it!

Thanks!

Jed,

 

Bump for an Awesome LICP, Never once popped off on me

 

Does the licp fit the MR?? I heard Bushard had some problems fitting the standard licp on the MR.