TTP Spec Groden Lightweight Aluminum Racing Rods for Evo X, MR, Ralliart!
May 29, 2009, 06:50 PM
#1
TTP Spec Groden Lightweight Aluminum Racing Rods for Evo X, MR, Ralliart!
TTP-Engineering is proud to release the first batch of Lightweight Groden Racing Rods available for the 4b11t engine! In Limited Quantity!
Groden Racing rods have been used in some of the highest powered, quickest and fastest 4g63 engines in the world already. After a long wait of R&D and manufacturing time, we finally have our custom TTP-Spec Aluminum Racing Rods available for sale on a limited run.
Some advantages of high strength aluminum rods are that they are very lightweight, reducing rotating mass and are easier on rod bearings.
Here is some additional information on TTP-Spec Groden Rods.
Leading the Industry in Aluminum Rod Technology!
Concentricity is the life of connecting rods. Groden Racing Rods offer the most concentric rod-to-cap alignment available. If you want precision alignment within .0002, even after hundreds of passes, choose the best, choose Groden Rods. Top engine builders and racers from Comp to Top Fuel have proven Groden to be the best aluminum rod on the market. There isn't a better design out there. There is none better.
Testimonials:
Originally Posted by Rev-Tech Racing Engines
"I have 500 CU.IN. Top Sportsman Nitrous motors that ran the whole year on "ONE" set of groden racing rods, the rods still measured to factory spec's." "I have tested with one set on the dyno for over five months, 553 Dyno Pulls , the bearings look brand new." "I run Groden Rods in all of my motors." "IT IS A GREAT ROD" - Dennis Warner, Rev - Tech Racing
Originally Posted by Faerman Racing Engines
"I would like to express to you how I feel about your company, Groden Racing Rods." "You have in my opinion the strongest rod on the market." "The service i recieve is excellent." "I do and will recommend you , your company , and your product to anyone who inquires about racing rods." - Dennis Faerman, Faerman Racing Engines
Originally Posted by Mike Shelton Racing
"We started using your rods because of the Strength and Lightness , and we can run closer tolerances with your rods and they Last Longer." "We usually have to change rods every 40 runs, we have 63 runs on your rods, they have been checked and put back in the motor as they did not move around any." ( 731 CU.IN. ) Pro Mod
"I use your rods in all my customers motors and have never had a rod break or fail." "I have tried nearly every aluminum rod on the market And Yours is the Best ." -
Mike Shelton - S&B Racing Ent. Inc.
"I use your rods in all my customers motors and have never had a rod break or fail." "I have tried nearly every aluminum rod on the market And Yours is the Best ." -
Mike Shelton - S&B Racing Ent. Inc.
