AWD Motorsports

iTrader: (211)

After Discussing with Dave the need for a full size 3.5" FMIC we came up with the Buschur Racing Street FMIC.. This is for those of you that dont really have the needs for the 4" Race FMIC.. The HP Rating on this Core is 920HP.. I would safely say this FMIC will control AIT's up to around 600whp before needing to go to the 4" race.. Of course many things play a role such as Fuel, Boost Levels, Drag or Road Race use etc.. If you need any suggestions feel free to contact us to get you in the right direction.. Thanks!!!

https://www.evolutionm.net/forums/se...-datalogs.html

What we have to offer now are 3 Sizes..

Buschur Street FMIC ( 350-600whp ) 3.5" x 12" x 24"..

Buschur Race FMIC ( 600-900whp ) 4" x 12" x 24"..

Buschur BFIC FMIC ( 900+whp ) 4.5" x 12" x 24"..


Buschur 3.5" Street FMIC




Buschur 4.5" BFIC ( Same FMIC we used ot make 1000+whp )

red03evo

iTrader: (20)

looks good.

Do all of them use the same licp?

I'm really thinking about getting that 3.5 inch for our other evo.

AWD Motorsports

iTrader: (211)

Yes the outlets are in the same place on all of them..

Mike

Cali2MDevo8

iTrader: (22)

Garrett cores?

AWD Motorsports

iTrader: (211)

as always Garrett Cores!!!

scheides

iTrader: (10)

awesome! I just upgraded to the race from the deluxe; this new street core should work awesome for most people. Are we gonna see some dyno results for this core vs the race core sometime? Pretty please?

dmoevo

iTrader: (5)

i think i might need to upgrade. mike does this fit my ets licp?

Kracka

iTrader: (49)

Nope. You're going to need either Buschur's LICP or make a custom one.

AWD Motorsports

iTrader: (211)

I will see what i can do.. My car runs the race but it has custom piping so i cant use it as a test dummy.. ill find something..

AWD Motorsports

iTrader: (211)

Youll need to swap to BR LICP bro sorry.. We can try to make what you have work though i am sure..

dmoevo

iTrader: (5)

alright if it comes down to it i can switch to the buschur licp and sell the ets.

thanks

AWD Motorsports

iTrader: (211)

Yeah you could always sell the ETS FMIC with LICP.. ill give you a good deal on the BR stuff dont worry..

Mike

dmoevo

iTrader: (5)

thanks bro you always do!!

David Buschur

iTrader: (53)

Thanks for making the post Mike, I was going to do it but you took every single FMIC we had and I had none to take pictures of! haha

As Mike said, all Garrett cores and this core is actually rated at 950 hp from Garrett. My belief is it will work for even more whp than Mike is giving it credit for

Thanks for getting these out there, we will start building more!

EmeryatSTM

iTrader: (79)

Cool, something new to show my customers...

We have tested a LOT of FMIC's here and the Buschur kits win hands down!



-Em