ETS - 3.0" - 3.5" - 4.0" - 5.0" - Intercoolers Ready For Shipment!! Free Shipping!
Sep 17, 2009, 04:46 PM
#1
ETS - 3.0" - 3.5" - 4.0" - 5.0" - Intercoolers Ready For Shipment!! Free Shipping!
Hello!
We have a Free Shipping special going on right now! We have all the cores on the shelf ready for shipment!
3.0" - $499.00 Shipped! (ETS Core)
3.5" - $599.00 Shipped! (ETS / Garrett Core)
4.0" - $699.00 Shipped! (ETS / 3.8" Garrett Core)
5.0" - $849.00 Shipped! (ETS Core)
If you want to save some money over the guys selling a similar unit for a higher price! Now is the time! We use a 24" core on our standard unit and 22" on our widetank version. Don't purchase a 20" or 18" core, the first thing you look at when building an intercooler is surface area!!
Thanks,
Michael
Last edited by ETS Michael; Sep 23, 2009 at 11:10 AM.
Sep 18, 2009, 10:24 AM
#6
The ETS EVO Piping kit is designed to eliminate many of the unnecessary bends in the stock piping. Our piping starts off by immediately expanding into 2.5” diameter right off of the turbo elbow. This replaces the tiny 1 3/4” factory pipe and instantly frees up 15hp and greatly improves spool up. From here it follows the core support and wraps around to mate up to the intercooler. Once the air passes through the intercooler, the piping takes a short direct path around the core support, over the transmission and straight up to the throttle body. This unique routing is over two feet shorter than the stock routing which results in greatly improved spool up and transient response. With an 11% increase in cross sectional area, flow is increased as well.
Check out the features below:
Features:
- Pressure Checked at 35psi
- Brushed Stainless Steel Piping
- Short Route or Stock Battery
- 2.5" or 3.0" Piping
- Bolt on design retains crash beam (3" and 3.5")
- Available in 3.0", 3.5", 4.0", 5.0" and 6.0"
- Fills entire grill with core
- Eliminates excessive piping
- Full Mandrel Bent 2.5" Piping
- Stainless Steel T-Bolt Clamps
- 3-Ply Reinforced Silicone Couplers
- Intercooler kits include the LP2
Evolution 9
Evolution 8
Evolution 8 Anodized (Available In Blue, Red, Black and Gold)
Evolution 9 Anodized (Available In Blue, Red, Black and Gold)
Evolution 8/9 w/ Cusco Power Brace
4.0" Intercooler Review w/ Dyno Graph (Done By TTP):
https://www.evolutionm.net/forums/ev...ts-inside.html
Intercooler Only Prices
- 3.0" - $499.00
- 3.5" - $599.00
- 4.0" - $699.00
- 5.0" - $849.00
- 6.0" - $999.00
- 3.0" - Starting at $943.95
- 3.5" - Starting at $1043.95
- 4.0" - Starting at $1143.95
- 5.0" - Starting at $1293.95
- 6.0" - Starting at $1443.95
Thanks,
Michael
Sep 18, 2009, 10:26 AM
#7
The main difference between wide and standard.
Wide = 22" wide core (Same size opening as the evo 9 bumper)
Std = 24" wide core (works on 9, but fills more of the grill on the large 8 opening.) - Largest size core you can fit on the 8/9 with stock crash beam.
Thanks!
Michael
Wide = 22" wide core (Same size opening as the evo 9 bumper)
Std = 24" wide core (works on 9, but fills more of the grill on the large 8 opening.) - Largest size core you can fit on the 8/9 with stock crash beam.
Thanks!
Michael
