Jestr e flash
#76
Evolving Member
iTrader: (2)
Join Date: Oct 2006
Location: Soquel, CA
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
I think you may stand corrected. Vishnu tuning does an ECU reflash ONLY and gets 40-45 whp gains! Costs 750 though. They quote 100-110 flywheel HP gains on just an ECU flash. Are you saying this isnt possible without tuning?
#77
EvoM Guru
iTrader: (5)
FWIW any reflash can make good gains, even if their not custom.. Just keeping the boost from tapering gains you half or more of those gains.. Anyone who has worked with an Evo for awhile can build a nice map thats safe and can make around 40whp.... Some are just more conservative than others when they do generic reflashes.
The key is that the enduser must log his car for some time to verify that there isn't any additional knock in critical areas that could be detrimental to the engine and performance.
The key is that the enduser must log his car for some time to verify that there isn't any additional knock in critical areas that could be detrimental to the engine and performance.
#78
Evolved Member
iTrader: (19)
Join Date: Sep 2005
Location: Butthole, MA
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MalibuJack
FWIW any reflash can make good gains, even if their not custom.. Just keeping the boost from tapering gains you half or more of those gains.. Anyone who has worked with an Evo for awhile can build a nice map thats safe and can make around 40whp.... Some are just more conservative than others when they do generic reflashes.
The key is that the enduser must log his car for some time to verify that there isn't any additional knock in critical areas that could be detrimental to the engine and performance.
The key is that the enduser must log his car for some time to verify that there isn't any additional knock in critical areas that could be detrimental to the engine and performance.
Say I'm running a pretty much stock car and want to get rid of as much taper as possible. The adjustments I am going to make:
Boost Desired Engine load (All 3) = Set all of them to 159.4
Max Wastegate Duty (All 3) = Set them all to 100
Boost Limit = Set to 255
Turbo Boost Error Correction = Taking the positive values and decreasing them from values of say -10 to -5? Not sure about this one
Does that seem right?
#79
Account Disabled
iTrader: (465)
Originally Posted by SophieSleeps
Would you mind sort of double checking my logic?
Say I'm running a pretty much stock car and want to get rid of as much taper as possible. The adjustments I am going to make:
Boost Desired Engine load (All 3) = Set all of them to 159.4
Max Wastegate Duty (All 3) = Set them all to 100
Boost Limit = Set to 255
Turbo Boost Error Correction = Taking the positive values and decreasing them from values of say -10 to -5? Not sure about this one
Does that seem right?
Say I'm running a pretty much stock car and want to get rid of as much taper as possible. The adjustments I am going to make:
Boost Desired Engine load (All 3) = Set all of them to 159.4
Max Wastegate Duty (All 3) = Set them all to 100
Boost Limit = Set to 255
Turbo Boost Error Correction = Taking the positive values and decreasing them from values of say -10 to -5? Not sure about this one
Does that seem right?
#80
Evolved Member
iTrader: (19)
Join Date: Sep 2005
Location: Butthole, MA
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TTP Engineering
Read the instructional thread in the Ecuflash forum. This is off topic.
I'll get out of this thread.
#81
Evolved Member
iTrader: (17)
Originally Posted by SophieSleeps
I don't see a sticky. I've read other boost control threads but people don't provide reasoning behind what they do...so I'm just trying to double check what I believe is right.
I'll get out of this thread.
I'll get out of this thread.
Thread
Thread Starter
Forum
Replies
Last Post
kevinoffroad4x4
Vendor Service / Parts / Tuning Review
16
Dec 7, 2008 09:28 AM