Notices
Vendor Service / Parts / Tuning Review Post your service, part & tuning reviews here. Please note all new threads are moderated.

Evo Ix...dynoflashed!!!!

Thread Tools
 
Search this Thread
 
Old Nov 21, 2006 | 02:36 PM
  #46  
3000ways's Avatar
Evolved Member
 
Joined: May 2004
Posts: 3,783
Likes: 0
From: Diamond Bar, California
Originally Posted by DynoFlash
Looking at the run shown in the dyno sheet on the first page the peak boost reaches just under 28 psi and then tapers down to exactly 20 psi at red line

The boost gauge reading in the car may be off

The car should be run at 27 - 28 psi peak boost tapering to 20 on pump gas

On race gas it can spike at 30 psi

I do not think going over 30 psi will yeild any additional power as the turbo is out of its compressor map island
Ok that makes since now, but still damn impressive and if you believe the conversion factor of a DD to a Dyno Jet (Multiply 1.14 or 1.15 to DD Number) you get 406whp-410whp/456-460wtq and that would be a record breaker for a stock turbo EVO (as far as torque goes). The DD dyno is very nice and I like how they all seem to fall in line with one another across the country, unlike Dyno Jets and Mustangs, but people just like to read higher numbers and that's why I don't think this car is getting the attention it deserves. I think this will be a very interesting fall and winter season for EVOs, with the cooler temps and the IX having a year under it's belt, I wouldn't be surprised if many stock turbo records fall.
Old Nov 21, 2006 | 02:43 PM
  #47  
dafunk630's Avatar
Thread Starter
Evolved Member
iTrader: (10)
 
Joined: Apr 2006
Posts: 1,447
Likes: 0
From: USA
everything was done on stock fmic and cams
Old Nov 21, 2006 | 02:44 PM
  #48  
dafunk630's Avatar
Thread Starter
Evolved Member
iTrader: (10)
 
Joined: Apr 2006
Posts: 1,447
Likes: 0
From: USA
if i would dynoed on a dyno jet how much do u think i would of made???
Old Nov 21, 2006 | 02:55 PM
  #49  
SlowCar's Avatar
Evolved Member
iTrader: (4)
 
Joined: Sep 2003
Posts: 3,456
Likes: 0
From: Kingdom of Saudi Arabia
Originally Posted by dafunk630
everything was done on stock fmic and cams
do you happen to know what is the nozzle size (GPH=?) used in your alky kit?
Old Nov 21, 2006 | 03:01 PM
  #50  
dafunk630's Avatar
Thread Starter
Evolved Member
iTrader: (10)
 
Joined: Apr 2006
Posts: 1,447
Likes: 0
From: USA
m7
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kaonashi
General Engine Management / Tuning Forum
202
Nov 19, 2014 07:41 PM
Wht9er
Evo Dyno Tuning / Results
39
Jul 13, 2009 05:59 AM
Nissan2Evo
South Region
4
Sep 30, 2008 11:08 PM
EvoLutionized8
European Forum
11
Jul 18, 2006 01:30 PM



Quick Reply: Evo Ix...dynoflashed!!!!



All times are GMT -7. The time now is 10:04 AM.