Pruven tuned 35R IX!
#1
Evolved Member
Thread Starter
iTrader: (14)
Join Date: Nov 2005
Location: newjersey
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
Pruven tuned 35R IX!
Hey guys just wanted to share my results of my stock block, stock ECU, stock MAF IX
the car currently has...
AMS 35R turbokit
780cc injectors
walbro 255lph fuel pump
turboXS exhaust
smc alcahol injection kit
AMS intercooler kit
cosworth IX cams
Works springs and retainers
exedy triple carbon clutch
I have had this car tuned three times already the first time was by Pruven performance it was tuned with 1000cc injectors it made 447 whp @24 psi the car ran well it idled better than i thought it would but i wanted it to be near stock so i went with 780cc injectors in hopes of better drivability and i had a well known vendor retune it and it made 406 whp @22 psi on the same dyno the car was reading a bunch of knock and the tuner could not figure out what was the cause for the loss in power so he said the knock was being caused by bad gas
so i got the cams, springs and retainers just installed and got the car retuned and i am happy with the results it made 485 whp and 368 tq @ 25.5 psi and the drivability is damn near perfect
So i would just like to say that I highly recomend Pruven Performance for the great tune and great customer service and they are now doing reflashes so if you are interested hit them up
the car currently has...
AMS 35R turbokit
780cc injectors
walbro 255lph fuel pump
turboXS exhaust
smc alcahol injection kit
AMS intercooler kit
cosworth IX cams
Works springs and retainers
exedy triple carbon clutch
I have had this car tuned three times already the first time was by Pruven performance it was tuned with 1000cc injectors it made 447 whp @24 psi the car ran well it idled better than i thought it would but i wanted it to be near stock so i went with 780cc injectors in hopes of better drivability and i had a well known vendor retune it and it made 406 whp @22 psi on the same dyno the car was reading a bunch of knock and the tuner could not figure out what was the cause for the loss in power so he said the knock was being caused by bad gas
so i got the cams, springs and retainers just installed and got the car retuned and i am happy with the results it made 485 whp and 368 tq @ 25.5 psi and the drivability is damn near perfect
So i would just like to say that I highly recomend Pruven Performance for the great tune and great customer service and they are now doing reflashes so if you are interested hit them up
#4
Evolved Member
Thread Starter
iTrader: (14)
Join Date: Nov 2005
Location: newjersey
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by App420
was it really great customer service? did you call them to set up the installs? just wondering how you got through....
As for the gas i used 93 octane and VP 100% methanol It was a conservative tune like i wanted it to be
#5
Evolving Member
iTrader: (8)
Join Date: May 2005
Location: CT
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
do they get back to you when you have a problem? or do they get back to you when you need to buy stuff services off of them? very impressive numbers btw... congrads! planing on building the bottom end?
#6
Evolved Member
Thread Starter
iTrader: (14)
Join Date: Nov 2005
Location: newjersey
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by App420
do they get back to you when you have a problem? or do they get back to you when you need to buy stuff services off of them? very impressive numbers btw... congrads! planing on building the bottom end?
Trending Topics
#11
Evolved Member
Thread Starter
iTrader: (14)
Join Date: Nov 2005
Location: newjersey
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by staatz
Nothing, chillen, I used to race bmx, NBL, was national 4 back when I raced 17expert, hows ridin goin?