Notices
Vendor Service / Parts / Tuning Review Post your service, part & tuning reviews here. Please note all new threads are moderated.

Fidanza 3.2 Carbon Kevlar Clutch and Aluminum Flywheel Review

Thread Tools
 
Search this Thread
 
Old Nov 12, 2007 | 06:59 AM
  #1  
spt's Avatar
spt
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Jun 2001
Posts: 565
Likes: 0
From: CA & MD
Fidanza 3.2 Carbon Kevlar Clutch and Aluminum Flywheel Review

CLICK HERE TO READ
Old Nov 12, 2007 | 09:35 AM
  #2  
Muad's Avatar
Evolving Member
iTrader: (19)
 
Joined: May 2006
Posts: 336
Likes: 0
From: Ohio
Nice write up. Two questions though. Why does it say "Author: Ali Allage", then under the first image it says: "By John Gadd" ????

Also how much was the kit and do you guys feel it offers a (Ok, Average, Great or Excellent) value for the $ spent?
Old Nov 12, 2007 | 09:41 AM
  #3  
Mike01gsr's Avatar
Evolved Member
iTrader: (33)
 
Joined: Jul 2006
Posts: 536
Likes: 0
From: PA
What is the torque rating of this clutch?
Old Nov 12, 2007 | 09:50 AM
  #4  
Smike's Avatar
Evolved Member
iTrader: (8)
 
Joined: Apr 2005
Posts: 9,002
Likes: 11
From: somewhere testing various tires, brakes, and suspensions.
What is the pedal pressure feel like? I.e. is it like stock or heavy like the ACT? Basically - would you have a sore ankle after stop and go traffic?
Old Nov 12, 2007 | 12:04 PM
  #5  
BLKLIST's Avatar
Evolving Member
iTrader: (11)
 
Joined: Nov 2006
Posts: 221
Likes: 0
From: USA
Torque capacity is 520 at the crank, pedal pressure is close to stock, 10% increase
Old Nov 12, 2007 | 12:05 PM
  #6  
BLKLIST's Avatar
Evolving Member
iTrader: (11)
 
Joined: Nov 2006
Posts: 221
Likes: 0
From: USA
I also had the 4.3 ceramic, pedal pressure is the same, torque capacity is 600 at the crank
Old Nov 12, 2007 | 12:28 PM
  #7  
Jrod@Buschur's Avatar
Former Sponsor
iTrader: (101)
 
Joined: Aug 2003
Posts: 4,487
Likes: 1
From: York, PA
We have been using Fidanza products for YEARS and have been pleased with their products and quality. Customer service has always been top notch unlike another clutch line that we dropped a little while back.

The Fidanza clutches are a good alternative for a cheaper clutch. I know you normally see Buschur Racing backing and promoting Exedy and Tilton because they are great units as well but we also realize some people can not spend that kind of money on a clutch for their car so the cheaper alternative I normally sell is Fidanza as they do shift well, engagement / disengagement doesnt seem to be an issue, pedal pressure isnt all that bad and if there is an issue they have good customer service to help you out with any problem you may have.

Customers have given me good feedback and were pleased with my recommendation of the clutch and flywheel for their Evolution.

Buschur Racing will be running a special on Fidanza clutches and flywheels starting today for 2 weeks only. I will post a link to the thread shortly.
Old Nov 13, 2007 | 05:37 PM
  #8  
mhgsx's Avatar
Evolved Member
iTrader: (6)
 
Joined: Mar 2003
Posts: 502
Likes: 0
Does the clutch rumble like the ACT or Exedy when coasting IN gear??
Old Nov 13, 2007 | 06:36 PM
  #9  
spt's Avatar
spt
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Jun 2001
Posts: 565
Likes: 0
From: CA & MD
Originally Posted by Muad
Nice write up. Two questions though. Why does it say "Author: Ali Allage", then under the first image it says: "By John Gadd" ????

Also how much was the kit and do you guys feel it offers a (Ok, Average, Great or Excellent) value for the $ spent?
I just published the article and John was the one who wrote it. Since he reviewed the clutch I'll make sure he gets on to answer everyone's questions.
Old Nov 13, 2007 | 07:25 PM
  #10  
BLKLIST's Avatar
Evolving Member
iTrader: (11)
 
Joined: Nov 2006
Posts: 221
Likes: 0
From: USA
I never had any rumbles after the break in period it is smooth
Old Nov 13, 2007 | 09:42 PM
  #11  
idriveanevo's Avatar
Evolved Member
iTrader: (30)
 
Joined: Jul 2006
Posts: 1,286
Likes: 0
From: in my Evo
what would the longevity of this clutch be compared to a exedy stage 1 or something similar?
Old Nov 14, 2007 | 05:31 AM
  #12  
BLKLIST's Avatar
Evolving Member
iTrader: (11)
 
Joined: Nov 2006
Posts: 221
Likes: 0
From: USA
of course longevity is often user controlled, but with that said you should be able to get years if service out of it daily driving, some track runs, spirited driving etc... just be sure to pick out the level that best fits your car and not just the numbers and you should be good for a long time.
Old Nov 14, 2007 | 06:13 AM
  #13  
Vapor's Avatar
Evolving Member
iTrader: (4)
 
Joined: Sep 2004
Posts: 215
Likes: 0
From: Florida
Originally Posted by Muad
Nice write up. Two questions though. Why does it say "Author: Ali Allage", then under the first image it says: "By John Gadd" ????

Also how much was the kit and do you guys feel it offers a (Ok, Average, Great or Excellent) value for the $ spent?
I'm the writer

I believe MSRP on the kit is in the 980 dollar range. I'm not sure what the average street price is, but I feel this clutch represents a great value for the money.

Originally Posted by SmikeEvo
What is the pedal pressure feel like? I.e. is it like stock or heavy like the ACT? Basically - would you have a sore ankle after stop and go traffic?
I'm not a big boy (6'0, 160lbs), but even after sitting in hours of Tampa gridlock, I've never had an issue with the pedal pressure. Its very similar to stock. I've had no joint aches or anything

Originally Posted by mhgsx
Does the clutch rumble like the ACT or Exedy when coasting IN gear??
I haven't noticed any new or unusual drivetrain noises since the installation, no. Actually, it got a little quieter

Originally Posted by idriveanevo
what would the longevity of this clutch be compared to a exedy stage 1 or something similar?
In my experience, the largest factor in clutch longevity is driving habits. I don't foresee anything with this clutch that might cause it to wear out any faster than any other brand.
Old Nov 14, 2007 | 06:21 AM
  #14  
BLKLIST's Avatar
Evolving Member
iTrader: (11)
 
Joined: Nov 2006
Posts: 221
Likes: 0
From: USA
Jarrod at buschur sells them all for way under $700 each I believe. Check with him though, he is running a special on them too and the flywheels. As seen above
Old Nov 14, 2007 | 07:40 AM
  #15  
Muad's Avatar
Evolving Member
iTrader: (19)
 
Joined: May 2006
Posts: 336
Likes: 0
From: Ohio
Originally Posted by Vapor
I'm the writer

I believe MSRP on the kit is in the 980 dollar range. I'm not sure what the average street price is, but I feel this clutch represents a great value for the money.
Cool, thanks for the clarification. I review products for a living, and that is one of the major things consumers ask me. Great write up, now i just need to hurry up and wear out this stocker




All times are GMT -7. The time now is 11:14 AM.