Siliconeintakes.com review
#20
Evolved Member
iTrader: (78)
one putting the tbolt clamps and getting them tight on my injen intake plus aps bov was near impossible kept blowing the bov out. I had it fully clamped down. i swaped to regular new clamps problem solve. Yes i also did order and get another silcone hose and tried it with the clamps ALL from them i might add i replaced all my injen hoses with theres blue . Another was the throttle body tbolt clamp was more of the same complete crap kept blowing off. replace with regular clamps brand new no issues. the only place it seemed to work well on was on my intercooler connecting both hoses to pipe. I fiqured i paid that money for the tbolts and replace them all with regular ones why not change those back to brand new regular clamps the ONLY TBOLT clamp i have on my evo is on lower intercooler pipe connecting to the turbo pipe(whatever its called) i left that one as it never gave me issues.
all 4 clamps used to be tbolt clamps bov keep flying upward. this is a very old pic but you get the ideal. i made a thread about it awhile ago as well and i was told to switch it out with hoses might as well.
when tbolts were installed
after i swapped everything out for regular brand new clamps from autozone. I did now i remember leaving tbolts on midpipe as it was blowing as well under boost.
now i got all new hoses from silconeintakes.com and they are very fast shipping the new midsection hose i had custom made from shop in UK as they did not have one that big for my specs for it.
Man i keep pics of everything i swear so im always prepared LOL
all 4 clamps used to be tbolt clamps bov keep flying upward. this is a very old pic but you get the ideal. i made a thread about it awhile ago as well and i was told to switch it out with hoses might as well.
when tbolts were installed
after i swapped everything out for regular brand new clamps from autozone. I did now i remember leaving tbolts on midpipe as it was blowing as well under boost.
now i got all new hoses from silconeintakes.com and they are very fast shipping the new midsection hose i had custom made from shop in UK as they did not have one that big for my specs for it.
Man i keep pics of everything i swear so im always prepared LOL
#21
Former Sponsor
iTrader: (56)
Join Date: Sep 2004
Location: DFW, TX
Posts: 2,701
Likes: 0
Received 0 Likes
on
0 Posts
well, i think the issue wasn't with the clamps, it was with the sizes you ordered. the TB clamp needs a 2.75" clamp, not the 3" clamp. and the BOV needs smaller then 1.5" clamps or else you'll bottom them out like you experienced. and the injen UICP has issues with the mid section coupler being to short. i always replace it with a longer peice of silicon coupler so you can get a clamp on properly last, the "kit" they sell is for stock pipes. some silicon coupers are really thin and the 2.5" clamps are to large to grab well. getting the correct sizes so they don't bottom out is key, but that can be said with any clamps. although most assuredly if you want to make big power, the worm clamps wont hold. you can't tighten them enough before they strip.
#22
Evolved Member
iTrader: (78)
ALL my clamps are brand new and i assure you i ordered the right sizes. i went and used injens guide and order the clamps i did not buy the kit i order them all inviduivally. so i know what i got was correct. just did not work for me therefore they are all in a box chillin. if you look at my pics you will see i bought anew midsection couler look at it thats the custom one i ordered from the UK. I had to cut it some or rather trim it but not bad
theres a pic of it of course i have one lol. Besides does not matter you will SEE this enginebay with your own eyes in january when you pull it all for my new motor . its all going to work if you use tbolt clamps more power to ya did not work for me but i kept the clamps in a box collecting dust
theres a pic of it of course i have one lol. Besides does not matter you will SEE this enginebay with your own eyes in january when you pull it all for my new motor . its all going to work if you use tbolt clamps more power to ya did not work for me but i kept the clamps in a box collecting dust
Last edited by RockmanX; Oct 26, 2009 at 03:00 PM.
#23
Evolved Member
iTrader: (55)
Like kevin said, you get the wrong side then you'll only have headaches, i have tbolts from them on my oem tb and i rock 30psi + ...If you get the wrong size then you wont get a perfect seal.
I'd like to also add to the list of great companies that ship stupid fast and are always on point:
Mil.Spec
201 Motorsports
MCMASTERcarr
JEGS
I'd like to also add to the list of great companies that ship stupid fast and are always on point:
Mil.Spec
201 Motorsports
MCMASTERcarr
JEGS
#24
Evolving Member
iTrader: (11)
Join Date: Aug 2009
Location: Oak Harbor, WA
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
The whole point of getting t-bolts is to replace the inferior worm clamps. I have the kit for my stock plumbing, and everything fit. I'm on a very lightly modded set-up and I was losing stock charge plumbing with worm clamps. The only t-bolts I have ever had fail are ones I forgot to tighten
#28
Evolved Member
iTrader: (15)
ALL my clamps are brand new and i assure you i ordered the right sizes. i went and used injens guide and order the clamps i did not buy the kit i order them all inviduivally. so i know what i got was correct. just did not work for me therefore they are all in a box chillin. if you look at my pics you will see i bought anew midsection couler look at it thats the custom one i ordered from the UK. I had to cut it some or rather trim it but not bad
theres a pic of it of course i have one lol. Besides does not matter you will SEE this enginebay with your own eyes in january when you pull it all for my new motor . its all going to work if you use tbolt clamps more power to ya did not work for me but i kept the clamps in a box collecting dust
theres a pic of it of course i have one lol. Besides does not matter you will SEE this enginebay with your own eyes in january when you pull it all for my new motor . its all going to work if you use tbolt clamps more power to ya did not work for me but i kept the clamps in a box collecting dust