PPI ported intake & 65mm throttle body reviewed!
#22
Account Disabled
Thread Starter
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
it's just difficult to reach some of the bolts for the bracket under the intake. Nothing hard or tricky if you've done an injector swap before, anyone can do it, it's just time consuming.
I started at 11am, took a 30 minute lunch and was completely finished at 7pm. I did stop and take pics as I went along too.
It was a long day but I took my time and learned alot about my car. I'm sure a competent mechanic could knock it out much faster and if you've ever had the intake off before you probably won't have about 30 bolts/brackets back in there.
I started at 11am, took a 30 minute lunch and was completely finished at 7pm. I did stop and take pics as I went along too.
It was a long day but I took my time and learned alot about my car. I'm sure a competent mechanic could knock it out much faster and if you've ever had the intake off before you probably won't have about 30 bolts/brackets back in there.