Bushur street fmic vs. Ets Garret 3.5" core
#33
Evolved Member
iTrader: (1)
Join Date: Jun 2006
Location: at the 5-10 no limit tables
Posts: 1,623
Likes: 0
Received 1 Like
on
1 Post
Easy research / end thread
I have respect for every shop....but! BR guys didnt go into the 8"s not knowing ****
Btw, I use hks race fmic
I have respect for every shop....but! BR guys didnt go into the 8"s not knowing ****
Btw, I use hks race fmic
Last edited by Clutchdc5; Dec 10, 2009 at 12:41 AM.
#37
Evolved Member
iTrader: (13)
I know buscher makes some great parts, and they are a great bunch of guys. No complaints for customer appreciation, but honestly I just hate the exhaust.
#40
Evolved Member
iTrader: (53)
sgtpetty210,
First, thanks for serving in the military.
The exhaust problems you are having sound like all installer error. Does your car have the JDM rear bumper cover on it? If so maybe the exhaust is for the EVO8-9 USDM rear bumper cover and someone changed the rear cover later. We make an exhaust specifically for the JDM rear bumper cover. If that's not the case then whoever installed it didn't push the muffler section onto the catback tube far enough, simple fix.
The downpipe is not hitting the sway bar, you must be talking about the lower tie bar. That is going to be a installation error too. Maybe they didn't remove the donut gasket from the 02 housing or they didn't install the tie bar spacers we send out. Many guys buy their exhausts used and don't get all the installation hardware to do it right or they just don't bother to read the instructions and know that there are stainless steel spacers sent for the tie bar.
Who knows what the problem is but what you are describing is not how our parts fit so I have to bring it down to an install error. If there's something I can do to help, please contact me.
First, thanks for serving in the military.
The exhaust problems you are having sound like all installer error. Does your car have the JDM rear bumper cover on it? If so maybe the exhaust is for the EVO8-9 USDM rear bumper cover and someone changed the rear cover later. We make an exhaust specifically for the JDM rear bumper cover. If that's not the case then whoever installed it didn't push the muffler section onto the catback tube far enough, simple fix.
The downpipe is not hitting the sway bar, you must be talking about the lower tie bar. That is going to be a installation error too. Maybe they didn't remove the donut gasket from the 02 housing or they didn't install the tie bar spacers we send out. Many guys buy their exhausts used and don't get all the installation hardware to do it right or they just don't bother to read the instructions and know that there are stainless steel spacers sent for the tie bar.
Who knows what the problem is but what you are describing is not how our parts fit so I have to bring it down to an install error. If there's something I can do to help, please contact me.
#41
Evolved Member
iTrader: (13)
David Buscher, thank you for the help and quick response. Reading the things you have described bring me to the conclusion it was instillation error also. The car does have the JDM rear bumper cover on it. So i'm sure that is why it sticks out the way it does. Either way, they are simple fixes and I will have them fixed. I still dont understand why it rattles the way it does. It sounds like a loose heat shield which brings me to believe it is my cat. I am debating wether or not I should purchase a new one, or just purchase a test pipe. But thank you for letting me know what the issues could be, this gives me a better understanding on what the original owner has done.
#42
Former Sponsor
iTrader: (91)
Thanks for the support everyone! If anyone has questions regarding our products, let me know!
Thanks for your time,
Michael
PS: Welcome back to the board David!
#43
Evolved Member
iTrader: (53)
sgtpetty, if the exhaust is sitting on the lower tie bar it will drive you nuts with the rattle, no doubt about that. If you send us your rear muffler section we can cut/modify it to fit correctly with the JDM rear bumper cover. While we are at it we can send you out the tie bar spacers. If you have someone that can pull it off while you are deployed contact me and send it in, we'll fix it up for you.