APM Racing Elmhurt, IL
Jul 30, 2010, 09:13 AM
#1
Evolving Member
Thread Starter
iTrader: (12)
Join Date: Jun 2006
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
APM Racing Elmhurst, IL
I have to give a shout to APM racing in Elmhurst. Originally just took my car there because it needed the 60K service done, fix some leaks from the T-case and install a boomba TB and a tune for E85.
He got it knocked out in a timely manner, but unfortunately the single walbro and 1050cc injectors proved to not be enough for the power the FP red could make on E85.
I took it home anyways, as I thought I would be happy with the power....I was wrong!
So I took it back and got a double Pumper put in (he made it and it works awesome!) and some 1350CC bluemax injectors put in and retuned again!
Awesome turn around time, good communication and the car really rips compared to before! And finally no leaks!!
Decided to stop at around 31PSI do to the stock longblock, but I think this will hold me over for a while.
I highly reccomend Maciek/APM Racing!
AND since my work hours suck, he met me at the shop around midnight so I could pick up my car! Now THATS customer service!!
Thanks again! It was a very fun drive home!
He got it knocked out in a timely manner, but unfortunately the single walbro and 1050cc injectors proved to not be enough for the power the FP red could make on E85.
I took it home anyways, as I thought I would be happy with the power....I was wrong!
So I took it back and got a double Pumper put in (he made it and it works awesome!) and some 1350CC bluemax injectors put in and retuned again!
Awesome turn around time, good communication and the car really rips compared to before! And finally no leaks!!
Decided to stop at around 31PSI do to the stock longblock, but I think this will hold me over for a while.
I highly reccomend Maciek/APM Racing!
AND since my work hours suck, he met me at the shop around midnight so I could pick up my car! Now THATS customer service!!
Thanks again! It was a very fun drive home!
Jul 31, 2010, 11:52 AM
#3
Evolving Member
Thread Starter
iTrader: (12)
Join Date: Jun 2006
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
No dyno yet, but according to the virtual dyno thing, I think it was right around 480whp. Debating if I should push it much further or if I should wait till winter and build the motor and just slap on a black.
Aug 2, 2010, 08:55 AM
#5
Evolving Member
Thread Starter
iTrader: (12)
Join Date: Jun 2006
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
FP RED
Synapse BOV
AMS 3" exhaust w/ test pipe
Megan 02
Ported Exhaust/intake manifold
Boomba TB
Keflord 272's
AMS LICP
Fujita UICP
APM Double Pumper
1350CC FIC bluemax
ARP headstuds
ACT Clutch
That's mainly it for engine stuff, We left a bit on the table do to the stock block. Going to build it this winter. Really need to re-do the transmission and get the Evo 8 4th gear also.
Synapse BOV
AMS 3" exhaust w/ test pipe
Megan 02
Ported Exhaust/intake manifold
Boomba TB
Keflord 272's
AMS LICP
Fujita UICP
APM Double Pumper
1350CC FIC bluemax
ARP headstuds
ACT Clutch
That's mainly it for engine stuff, We left a bit on the table do to the stock block. Going to build it this winter. Really need to re-do the transmission and get the Evo 8 4th gear also.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
APM Racing
Midwest Region
3
Mar 18, 2014 07:58 AM
Intellex
For Sale - Cars For Sale
19
Mar 9, 2014 02:45 PM
APM Racing
Midwest Region
22
Jun 1, 2011 02:33 PM
