*Black Anodized* AMS EVO X FMIC!!
Mar 18, 2009, 08:57 AM
#1
Evolved Member
Thread Starter
iTrader: (62)
Join Date: Apr 2006
Posts: 578
Likes: 0
Received 0 Likes
on
0 Posts
*Black Anodized* AMS EVO X FMIC!!
This is an AMS intercooler we sent to a local anodizer. We had it done in black but we were not 100% satisfied with the results. As you can see from the pictures there are some light spots on the finish. Once the intercooler is installed onto a car it will not be as noticeable.
The AMS Mitsubishi Lancer Evolution X Front Mount Intercooler is a direct bolt on utilizing your stock piping and mounting points with purpose built cast end tanks for the Evolution 10. This intercooler has over 80% more internal flow area than its stock counterpart. Our stock Evolution 10 gained 10 Wheel horsepower over the stock core just by bolting it on, without even re-tuning the ECU!
We tested many intercooler cores before finding the best performing core available. The bar and plate style core is 12.4" tall, 20" wide and 3.625" thick flowing 1250 cfm. The same durable, race proven intercooler core we used on our record setting Time Attack EVO, proven efficient to 650 whp
Exclusive Features
• Direct factory replacement with NO cutting or trimming required
• Adds 10 whp WITHOUT re-tuning the ECU
• 80% more flow area over stock
• Bolts right up to the stock piping
• Utilizes the factory intercooler hangers along with added supports
• UNLIKE OTHER AFTERMARKET INTERCOOLERS, the AMS unit incorporates an angled inlet just like the factory for a proper fit with the intercooler piping
• All AMS intercoolers are pressure tested after assembly to 50 psi
Specifications
• 12.4" tall, 20" wide (32" with end tanks and bracket) and 3.625" thick
• 1250 cfm flow and only 1 psi pressure drop at 650 whp
Applications
• Mitsubishi Lancer Evolution X GSR and MR Models
• Fits all USDM, JDM and European Models
Click Here for More Info!!!
$699.95
The AMS Mitsubishi Lancer Evolution X Front Mount Intercooler is a direct bolt on utilizing your stock piping and mounting points with purpose built cast end tanks for the Evolution 10. This intercooler has over 80% more internal flow area than its stock counterpart. Our stock Evolution 10 gained 10 Wheel horsepower over the stock core just by bolting it on, without even re-tuning the ECU!
We tested many intercooler cores before finding the best performing core available. The bar and plate style core is 12.4" tall, 20" wide and 3.625" thick flowing 1250 cfm. The same durable, race proven intercooler core we used on our record setting Time Attack EVO, proven efficient to 650 whp
Exclusive Features
• Direct factory replacement with NO cutting or trimming required
• Adds 10 whp WITHOUT re-tuning the ECU
• 80% more flow area over stock
• Bolts right up to the stock piping
• Utilizes the factory intercooler hangers along with added supports
• UNLIKE OTHER AFTERMARKET INTERCOOLERS, the AMS unit incorporates an angled inlet just like the factory for a proper fit with the intercooler piping
• All AMS intercoolers are pressure tested after assembly to 50 psi
Specifications
• 12.4" tall, 20" wide (32" with end tanks and bracket) and 3.625" thick
• 1250 cfm flow and only 1 psi pressure drop at 650 whp
Applications
• Mitsubishi Lancer Evolution X GSR and MR Models
• Fits all USDM, JDM and European Models
Click Here for More Info!!!
$699.95
Thread
Thread Starter
Forum
Replies
Last Post
LancerShop.com
Evo 'For Sale' External Engine / Power
37
Apr 2, 2008 12:08 PM
AutoMotoSports
Automotosports - Illinois
33
Dec 13, 2007 03:20 PM
AutoMotoSports
Automotosports - Illinois
89
Aug 13, 2006 02:12 AM
