YEVOVIII

Just wondering. I know on the downpipe but where would be the best place on the downpipe?

Nez136

iTrader: (10)

prob. just before the cat

Vishnu_Evo8

iTrader: (6)

one minute bung holes? isnt that dustin's fav place to hang out?

Erik@MIL.SPEC

iTrader: (94)

I put mine at 12 o'clock right before the cat. Works perfect. If that scares you, maybe try 1 0'clock.

ruzs

iTrader: (5)

so the O2 is pointing straight up? Is there enough clearance between the exhaust and the chasis?

donour

iTrader: (6)

12 oclock means it would be pointing straight down. I believe it is very bad to have the sensor below the horizon.

d

Erik@MIL.SPEC

iTrader: (94)

Yup. At least on mine there is. That's why I said try 1 o'clock if you can't handle 12

That's 1 o'clock as you're looking at the front of the car from the back.

If I had time, I'd post a pic.

Erik@MIL.SPEC

iTrader: (94)

On a 3 inch downpipe I don't think you'll go past the horizon.

Cajun Power

iTrader: (3)

All this talk about 3", bungs, straight up... you guys scare me!! ! ! !


I like my bung right between my cheeks.


LOL, never below 3 or 9 10 to 2 is better 12 is best. At least 18" from turbo as far back as possible but never after a cat is best. End of the DP is great at 12. There are some pics of an install somewhere on the site. Do a search.

Dustin@Vishnu

iTrader: (1)

6 o'clock would be straight down.

Install the senor between 10 and 2 if possible. And make sure it is at least 12" away from the turbo, and before the cat.

asasin79

iTrader: (10)

i have 2, both are very near 12 o'clock just at the end of the transfer case. enough room to get an adjustable wrench in there.