Injection Fail Safe by Labonte MotorSports now available
#34
Former Sponsor
Thread Starter
iTrader: (9)
Join Date: Nov 2007
Location: Rockford, IL
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
The IFS-10 or IFS-20 are each $139.00. Both in stock.
More infor here:
http://www.labontemotorsports.com/st...onitoring.html
More infor here:
http://www.labontemotorsports.com/st...onitoring.html
#35
Former Sponsor
Thread Starter
iTrader: (9)
Join Date: Nov 2007
Location: Rockford, IL
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Need to know your flow? Labonte MotorSports has the answer. The IFG-20 is a 52mm gauge that can be used with the Injection Fail Safe (IFS-10) to display fluid flow in Real Time. The built in Peak & Hold feature lets you recall the last maximum injection flow rate. No more guess work when tuning to know your systems injection output.
Available in Red ($74.94) or Blue ($79.95) LEDs
#43
Former Sponsor
Thread Starter
iTrader: (9)
Join Date: Nov 2007
Location: Rockford, IL
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
The IFS-10 and IFS-20 are functionally the same, only difference are the fittings.
IFS-10 uses 1/4" hose quick connects.
IFS-20 uses -4AN fittings.
#45
Evolved Member
iTrader: (25)
I have a question about this unit before I purchase it.
The user set-point would be your base flow, roughly. So like when the kit begins to spray, you would measure this amount, and that would be when the failsafe deactivates. If it drops below it activates.
What happens if the line were to pop off between the failsafe and the nozzle? The flow would go to max flow, is this a user adjustable setting as well? So that if this did happen it could cut you back to failsafe mode too...
The user set-point would be your base flow, roughly. So like when the kit begins to spray, you would measure this amount, and that would be when the failsafe deactivates. If it drops below it activates.
What happens if the line were to pop off between the failsafe and the nozzle? The flow would go to max flow, is this a user adjustable setting as well? So that if this did happen it could cut you back to failsafe mode too...