aem meth kit
#32
Evolving Member
iTrader: (2)
Join Date: Apr 2009
Location: australia
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
I run 100% Meth in my AEM Kit, no problem. I have the 5 gallon tank option which no other company is advertising. There are multiple warning signals to indicate malfunctions, but you'll want to mate up a physical failsafe. Just like Tryx wrote above, I use a Snow Performance Wastegate Solenoid as well (52$). Easily wires right in...green on the AEM controller to either black wire on the Snow's solenoid.
Good Kit!
Good Kit!
#36
#37
#40
Account Disabled
Join Date: Feb 2010
Location: California
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
The error signal will continue to flash until the error is resolved. Our controller can detect multiple errors and it has a different flash count for each one. A single repeating flash indicates low fluid, two flashes for an open circuit, three flashes for a short circuit, and four flashes for either a high or low voltage condition.
Once the error is fixed the LED will go back to showing your injection status.
#45
Newbie
iTrader: (4)
Join Date: May 2009
Location: Woodbridge VA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
just bought a aem meth kit and i would like to know how long the 1 gallons tank of meth last when using it on autocross
Last edited by Revolution9mr; Jun 30, 2012 at 11:12 PM. Reason: missing word