91oct + 100% meth = what octane rating
#1
Evolving Member
Thread Starter
Join Date: Jun 2009
Location: Top Secret....
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
91oct + 100% meth = what octane rating
Hey guys I just have a question that I can't seem to find the answer to. I'm wondering what the octane rating will be ( approximately ) while running 91 and meth. I have read that meth is around 115 Oct and mixed with the 91 it will be around 100 or 105 Oct. Let me know what you think if my math is right or not. Thanks in advance!
DaGerman
DaGerman
#3
Evolving Member
Thread Starter
Join Date: Jun 2009
Location: Top Secret....
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
I don't have the kit installed just yet so I'm still trying to research my set up. I was leaning towards a 1.0 about 8 inches from the TB and a .8 a little closer. but like I said the setup is still up in the air right now
#5
Evolving Member
Thread Starter
Join Date: Jun 2009
Location: Top Secret....
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Alright that makes some sense to me. I will be running 91 with 950cc injectors and then the meth on top of it all. I'll do some more checking to see if I should run the dual injection or just a single. Right now I'm running the stock turbo but I plan on getting a ported BBK or perhaps the new HKS but I haven't decided. Is anyone out there running a similar setup that's willing to learn me some stuff LOL? Any info would be appreciated, thanks and be safe over the weekend!
DaGerman
DaGerman
Trending Topics
#8
Evolving Member
Thread Starter
Join Date: Jun 2009
Location: Top Secret....
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Better yet where are you locations? I've seen before IC and after IC, 4 inches from TB , 12inches from TB, all sorts of setups. Does it matter or is it all personal taste as to where you put them? Let me know what you guys think!
#12
Evolving Member
Thread Starter
Join Date: Jun 2009
Location: Top Secret....
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Right now I'm running the stock turbo, I have been looking at the ported BBK and the new HKS. I will be running 950cc injectors with gsc S1 cams but on the stock block
#13
iTrader: (10)
Just do dual .6's for now then (if you are talking aquamist?) and then upgrade to .8's when you upgrade your turbo. *** that HKS turbo.
Why you should think twice before buying HKS products
Why you should think twice before buying HKS products
#15
Evolving Member
Thread Starter
Join Date: Jun 2009
Location: Top Secret....
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Ok here's the plan, FP Green, 950cc injectors running a dual nozzle set up ( from what im estimating a 1.0 and a 0.9 ) running around 27 or 28 PSI. The way I calculated it out was as follows, 950cc x 4 = 3800cc, I want to run 100% meth so 20-25% of fuel flow = (20% = 760cc ) ( 25%= 950cc ) plus the 10% system loss, so 1045cc , So after doing all the math and looking at the charts ( Thank you to Howerton Engineering !!) I come up with a 1.0mm and a 0.9mm injecting 1041cc. Does all this sound right or am I just way off? Let me know what you guys think