***Official NV Chat Thread***
Evolved Member
iTrader: (39)
can I ride with you Alan, I'll hold on really tight and will not let go
Evolving Member
iTrader: (1)
And Alan, u gonna get at least 10 sec on that bike right?
Evolved Member
iTrader: (39)
Evolving Member
iTrader: (3)
And no 10s for me with it. Best has been a 11.2 @ 125 when it was cool out. Last time out only went 11.3 @ 122. Heats killing it. Still need to work on 60fts anyways with it.
Evolved Member
iTrader: (39)
Evolving Member
iTrader: (1)
Sure thing, u want the type like the basketball shorts back in the 70s-80s? And rollerskates, I have to go into my storage and dust it off.
Alan, lift the front 3" off the ground and blip the throttle when changing gears...don't use clutch. Only time u should use clutch is dead stop and from 1st to 2nd...but then again, I think u already know that.
If u don't, I'll walk u through it on the track, real easy. Basically from second and up, just put pressure on the shifter and when u blip the throttle it automatically goes up a gear.
What 600 u got? Honda, zuki, yami, Kawi? I've done 10.9 on my cbr600rr doing just what I just described.
Alan, lift the front 3" off the ground and blip the throttle when changing gears...don't use clutch. Only time u should use clutch is dead stop and from 1st to 2nd...but then again, I think u already know that.
If u don't, I'll walk u through it on the track, real easy. Basically from second and up, just put pressure on the shifter and when u blip the throttle it automatically goes up a gear.
What 600 u got? Honda, zuki, yami, Kawi? I've done 10.9 on my cbr600rr doing just what I just described.
Evolving Member
iTrader: (3)
Sure thing, u want the type like the basketball shorts back in the 70s-80s? And rollerskates, I have to go into my storage and dust it off.
Alan, lift the front 3" off the ground and blip the throttle when changing gears...don't use clutch. Only time u should use clutch is dead stop and from 1st to 2nd...but then again, I think u already know that.
If u don't, I'll walk u through it on the track, real easy. Basically from second and up, just put pressure on the shifter and when u blip the throttle it automatically goes up a gear.
What 600 u got? Honda, zuki, yami, Kawi? I've done 10.9 on my cbr600rr doing just what I just described.
Alan, lift the front 3" off the ground and blip the throttle when changing gears...don't use clutch. Only time u should use clutch is dead stop and from 1st to 2nd...but then again, I think u already know that.
If u don't, I'll walk u through it on the track, real easy. Basically from second and up, just put pressure on the shifter and when u blip the throttle it automatically goes up a gear.
What 600 u got? Honda, zuki, yami, Kawi? I've done 10.9 on my cbr600rr doing just what I just described.
Got it closer to the 10s at least. Im still on original tire the bike came with from the dealer. Not quite the best for drag.
Evolving Member
iTrader: (21)
Join Date: Jan 2006
Location: LAS VEGAS
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Track was fun tonight, good seeing you guys out there. seen a few new evo guys but didnt get to iintroduce myself to anyone new. Also Missed watchig the races , but i got some seat time in the evo for the first time in over a year. Thanks to J Quest and Curtis for helping me pull off a new personal best time tonight.
Evolved Member
iTrader: (29)
Today is a sad ,sad day. I can no longer tease EvoFredo for running 12s. After a short stint in the 11s along with some minor adjustments, he finally hit that magic number. With zero track prep, lifting on the shifts and lame *** low boost
There where a few other evos at the track tonight, I didnt recognize most of them. Anyone on this forum?
There where a few other evos at the track tonight, I didnt recognize most of them. Anyone on this forum?
Last edited by SOEuro; Jun 30, 2012 at 02:03 AM.
Evolving Member
iTrader: (21)
Join Date: Jan 2006
Location: LAS VEGAS
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Its all just free weight reductions mods. Havent really spent much time & money on weight reduction maybe i should look into some more free Mods.
Evolving Member
iTrader: (21)
Join Date: Jan 2006
Location: LAS VEGAS
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, couldnt have done it with you guys to give me a little push in the right direction, as far as weight reduction goes. off the top of my head:
--removed the intercooler sprayer,
-- BR Mini Battery tray W/odessey,
-- oil cooler delete
--remove random harness brackets from engine bay,
--remove some undercoating from inside fenders
--D2 coil overs,
--16x8 FD wheels / hoosiers
--Remove Front crash bar,
--16Gauge Stainless exhaust,
-- rear wiper delete,
--remove rear crash bar,
--remove spare tire/jack
--rear Evap canister delete
actually dont think i missed anything. Might try some other litle stuff to help put me in t 2900 range. bunch of little stuff just to give me a slight edge
-- Remove floor mats
-- Remove sound deadning from under carpet (front seats- back) no dash stuff
-- remove more under coating from center of body
-- remove rear carpet/liner from trunk
-- Passenger seats since i cant have a rider anyways
-- Rear muffler delete
-- might do some sit ups to loose weight & get buff so i can look like DjJimgreen
Last edited by EvoFredo; Jun 30, 2012 at 09:35 AM.